Click here

FRONT SEAT CUSHION HEATER INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER LH (FRONT SEAT CUSHION HEATER) (for Standard Seat Type)


    1. B004W3P

      Disconnect the connector.

    2. Check the seat cushion cover surface.


      1. B004XZDC03
        *a

        Component without harness connected

        (Front Seat Cushion Heater (Separate Type Seat Cushion Cover LH))

        		 *b Connector A
        *c Connector B - -

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        Q36-1 - B-1 Always 20°C 2.34 to 2.86 Ω
        Q36-1 - B-2 Always 20°C 2.70 to 3.30 Ω
        Q36-1 - A-2 Always 20°C 2.70 to 3.30 Ω
        Q36-1 - Q36-2 Always 20°C 2.70 to 3.30 Ω
        Q36-2 - Q36-6 Always 20°C Below 1 Ω
        A-2 - B-1 Always 20°C 4.59 to 5.61 Ω
        A-2 - B-2 Always 20°C Below 1 Ω
        B-1 - B-2 Always 20°C 4.86 to 5.94 Ω
        If the result is not as specified, replace the separate type seat cushion cover LH (front seat cushion heater).

    3. Check the seat cushion cover side.


      1. B004RLBC01
        *a

        Component without harness connected

        (Front Seat Cushion Heater (Separate Type Seat Cushion Cover LH))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 20°C 0.72 to 0.88 Ω
        If the result is not as specified, replace the separate type seat cushion cover LH (front seat cushion heater).
  2. Click here

    INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER LH (FRONT SEAT CUSHION HEATER) (for Sports Seat Type)


    1. B004RML

      Disconnect the connector.

    2. Check the seat cushion cover surface.


      1. B004T3ZC04
        *a

        Component without harness connected

        (Front Seat Cushion Heater (Separate Type Seat Cushion Cover LH))

        		 *b Connector A
        *c Connector B - -

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        Q36-1 - B-1 Always 20°C 2.34 to 2.86 Ω
        Q36-1 - B-2 Always 20°C 2.70 to 3.30 Ω
        Q36-1 - A-2 Always 20°C 2.79 to 3.41 Ω
        Q36-1 - Q36-2 Always 20°C 2.70 to 3.30 Ω
        Q36-2 - Q36-6 Always 20°C Below 1 Ω
        A-2 - B-1 Always 20°C 4.77 to 5.83 Ω
        A-2 - B-2 Always 20°C Below 1 Ω
        B-1 - B-2 Always 20°C 4.68 to 5.72 Ω
        If the result is not as specified, replace the separate type seat cushion cover LH (front seat cushion heater).

    3. Check the seat cushion cover side.


      1. B004T8HC01
        *a

        Component without harness connected

        (Front Seat Cushion Heater (Separate Type Seat Cushion Cover LH))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 20°C 0.72 to 0.88 Ω
        If the result is not as specified, replace the separate type seat cushion cover LH (front seat cushion heater).
  3. Click here

    INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER RH (FRONT SEAT CUSHION HEATER) (for Standard Seat Type)


    1. B004TW2

      Disconnect the connector.

    2. Check the seat cushion cover surface.


      1. B004SJ5C03
        *a

        Component without harness connected

        (Front Seat Cushion Heater (Separate Type Seat Cushion Cover RH))

        		 *b Connector A
        *c Connector B - -

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        Q15-1 - B-1 Always 20°C 2.34 to 2.86 Ω
        Q15-1 - B-2 Always 20°C 2.70 to 3.30 Ω
        Q15-1 - A-2 Always 20°C 2.70 to 3.30 Ω
        Q15-1 - Q15-2 Always 20°C 2.70 to 3.30 Ω
        Q15-2 - Q15-6 Always 20°C Below 1 Ω
        A-2 - B-1 Always 20°C 4.59 to 5.61 Ω
        A-2 - B-2 Always 20°C Below 1 Ω
        B-1 - B-2 Always 20°C 4.86 to 5.94 Ω
        If the result is not as specified, replace the separate type seat cushion cover RH (front seat cushion heater).

    3. Check the seat cushion cover side.


      1. B004W20C01
        *a

        Component without harness connected

        (Front Seat Cushion Heater (Separate Type Seat Cushion Cover RH))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 20°C 0.72 to 0.88 Ω
        If the result is not as specified, replace the separate type seat cushion cover RH (front seat cushion heater).
  4. Click here

    INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER RH (FRONT SEAT CUSHION HEATER) (for Sports Seat Type)


    1. B004RML

      Disconnect the connector.

    2. Check the seat cushion cover surface.


      1. B004T3ZC05
        *a

        Component without harness connected

        (Front Seat Cushion Heater (Separate Type Seat Cushion Cover RH))

        		 *b Connector A
        *c Connector B - -

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        Q15-1 - B-1 Always 20°C 2.34 to 2.86 Ω
        Q15-1 - B-2 Always 20°C 2.70 to 3.30 Ω
        Q15-1 - A-2 Always 20°C 2.79 to 3.41 Ω
        Q15-1 - Q15-2 Always 20°C 2.70 to 3.30 Ω
        Q15-2 - Q15-6 Always 20°C Below 1 Ω
        A-2 - B-1 Always 20°C 4.77 to 5.83 Ω
        A-2 - B-2 Always 20°C Below 1 Ω
        B-1 - B-2 Always 20°C 4.68 to 5.72 Ω
        If the result is not as specified, replace the separate type seat cushion cover RH (front seat cushion heater).

    3. Check the seat cushion cover side.


      1. B004T8HC01
        *a

        Component without harness connected

        (Front Seat Cushion Heater (Separate Type Seat Cushion Cover RH))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 20°C 0.72 to 0.88 Ω
        If the result is not as specified, replace the separate type seat cushion cover RH (front seat cushion heater).