SEAT MEMORY SWITCH INSPECTION
PROCEDURE
-
INSPECT SEAT MEMORY SWITCH LH
-
for Driver side:
-
*a 1 Switch *b 2 Switch *c 3 Switch *d SET Switch *e P SEAT Switch *f Component without harness connected
(Seat Memory Switch LH)
Check the resistance.
Measure the resistance according to the value(s) in the table below.
Standard Resistance If the result is not as specified, replace the seat memory switch LH.Tester Connection Condition Specified Condition H35-15 (1) - H35-18 (E) 1 switch pressed Below 1 Ω H35-15 (1) - H35-18 (E) 1 switch not pressed 10 kΩ or higher H35-14 (2) - H35-18 (E) 2 switch pressed Below 1 Ω H35-14 (2) - H35-18 (E) 2 switch not pressed 10 kΩ or higher H35-19 (3) - H35-18 (E) 3 switch pressed Below 1 Ω H35-19 (3) - H35-18 (E) 3 switch not pressed 10 kΩ or higher H35-17 (MMRY) - H35-18 (E) SET switch pressed Below 1 Ω H35-17 (MMRY) - H35-18 (E) SET switch not pressed 10 kΩ or higher H35-16 (P) - H35-18 (E) P SEAT switch pressed Below 1 Ω H35-16 (P) - H35-18 (E) P SEAT switch not pressed 10 kΩ or higher
-
Check the illumination.
Apply auxiliary battery voltage to the connector and check the light illumination condition.
OK If the result is not as specified, replace the seat memory switch LH.Tester Connection Specified Condition H35-12 (ILL+) - Auxiliary battery positive (+)
H35-20 (ILL-) - Auxiliary battery negative (-)
Illuminates
-
Check the indicator.
Apply auxiliary battery voltage to the connector and check the indicator illumination condition.
OK If the result is not as specified, replace the seat memory switch LH.Tester Connection Specified Condition H35-11 (IND) - Auxiliary battery positive (+)
H35-18 (E) - Auxiliary battery negative (-)
Illuminates
-
-
for Passenger side:
-
*a 1 Switch *b 2 Switch *c 3 Switch *d SET Switch *e Component without harness connected
(Seat Memory Switch LH)
Check the resistance.
Measure the resistance according to the value(s) in the table below.
Standard Resistance If the result is not as specified, replace the seat memory switch LH.Tester Connection Condition Specified Condition H35-15 (1) - H35-18 (E) 1 switch pressed Below 1 Ω H35-15 (1) - H35-18 (E) 1 switch not pressed 10 kΩ or higher H35-14 (2) - H35-18 (E) 2 switch pressed Below 1 Ω H35-14 (2) - H35-18 (E) 2 switch not pressed 10 kΩ or higher H35-19 (3) - H35-18 (E) 3 switch pressed Below 1 Ω H35-19 (3) - H35-18 (E) 3 switch not pressed 10 kΩ or higher H35-17 (MMRY) - H35-18 (E) SET switch pressed Below 1 Ω H35-17 (MMRY) - H35-18 (E) SET switch not pressed 10 kΩ or higher
-
Check the illumination.
Apply auxiliary battery voltage to the connector and check the light illumination condition.
OK If the result is not as specified, replace the seat memory switch LH.Tester Connection Specified Condition H35-12 (ILL+) - Auxiliary battery positive (+)
H35-20 (ILL-) - Auxiliary battery negative (-)
Illuminates
-
-
-
INSPECT SEAT MEMORY SWITCH RH
-
for Driver Side:
-
*a 1 Switch *b 2 Switch *c 3 Switch *d SET Switch *e P SEAT Switch *f Component without harness connected
(Seat Memory Switch RH)
Check the resistance.
Measure the resistance according to the value(s) in the table below.
Standard Resistance If the result is not as specified, replace the seat memory switch RH.Tester Connection Condition Specified Condition H17-16 (M1) - H17-13 (E) 1 switch pressed Below 1 Ω H17-16 (M1) - H17-13 (E) 1 switch not pressed 10 kΩ or higher H17-17 (M2) - H17-13 (E) 2 switch pressed Below 1 Ω H17-17 (M2) - H17-13 (E) 2 switch not pressed 10 kΩ or higher H17-12 (M3) - H17-13 (E) 3 switch pressed Below 1 Ω H17-12 (M3) - H17-13 (E) 3 switch not pressed 10 kΩ or higher H17-14 (MRY) - H17-13 (E) SET switch pressed Below 1 Ω H17-14 (MRY) - H17-13 (E) SET switch not pressed 10 kΩ or higher H17-15 (P) - H17-13 (E) P SEAT switch pressed Below 1 Ω H17-15 (P) - H17-13 (E) P SEAT switch not pressed 10 kΩ or higher
-
Check the illumination.
Apply auxiliary battery voltage to the connector and check the light illumination condition.
OK If the result is not as specified, replace the seat memory switch RH.Tester Connection Specified Condition H17-19 (ILL+) - Auxiliary battery positive (+)
H17-11 (ILL-) - Auxiliary battery negative (-)
Illuminates
-
Check the indicator.
Apply auxiliary battery voltage to the connector and check the indicator illumination condition.
OK If the result is not as specified, replace the seat memory switch RH.Tester Connection Specified Condition H17-20 (IND) - Auxiliary battery positive (+)
H17-13 (E) - Auxiliary battery negative (-)
Illuminates
-
-
for Passenger Side:
-
*a 1 Switch *b 2 Switch *c 3 Switch *d SET Switch *e Component without harness connected
(Seat Memory Switch RH)
Check the resistance.
Measure the resistance according to the value(s) in the table below.
Standard Resistance If the result is not as specified, replace the seat memory switch RH.Tester Connection Condition Specified Condition H17-16 (M1) - H17-13 (E) 1 switch pressed Below 1 Ω H17-16 (M1) - H17-13 (E) 1 switch not pressed 10 kΩ or higher H17-17 (M2) - H17-13 (E) 2 switch pressed Below 1 Ω H17-17 (M2) - H17-13 (E) 2 switch not pressed 10 kΩ or higher H17-12 (M3) - H17-13 (E) 3 switch pressed Below 1 Ω H17-12 (M3) - H17-13 (E) 3 switch not pressed 10 kΩ or higher H17-14 (MRY) - H17-13 (E) SET switch pressed Below 1 Ω H17-14 (MRY) - H17-13 (E) SET switch not pressed 10 kΩ or higher
-
Check the illumination.
Apply auxiliary battery voltage to the connector and check the light illumination condition.
OK If the result is not as specified, replace the seat memory switch RH.Tester Connection Specified Condition H17-19 (ILL+) - Auxiliary battery positive (+)
H17-11 (ILL-) - Auxiliary battery negative (-)
Illuminates
-
-