CUSTOMIZE SEAT VIBRATION SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Seat.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| D Seat Refresh Level Setting | Driver seat refresh mode strength setting (w/ Front Refresh Seat) | Normal | 0:Normal,1:Stronger | Position control ECU assembly |
| P Seat Refresh Level Setting | Passenger seat refresh mode strength setting (w/ Front Refresh Seat) | Normal | 0:Normal,1:Stronger | No. 2 position control ECU assembly |
| RR Occupant Condition Setting | Rear seat RH occupant condition setting | ON | 0:ON,1:OFF | Position control ECU assembly RH |
| RR Refresh Spot Heater Upper Limit Temp Setting | Rear seat RH heater maximum temperature limit setting | Level 3 | 000:Level 1,001:Level 2,010:Level 3,011:Level 4,100:Level 5 | Position control ECU assembly RH |
| RL Occupant Condition Setting | Rear seat LH occupant condition setting | ON | 0:ON,1:OFF | Position control ECU assembly LH |
| RL Refresh Spot Heater Upper Limit Temp Setting | Rear seat LH heater maximum temperature limit setting | Level 3 | 000:Level 1,001:Level 2,010:Level 3,011:Level 4,100:Level 5 | Position control ECU assembly LH |