REAR POWER SEAT CONTROL SYSTEM OPERATION CHECK


  1. CHECK BASIC FUNCTION


    1. Check that each function of the power seat operates normally by using the rear power seat switch (rear multi operation panel).

      B004W8NC02
      *1 Front Passenger Seat Full Front/Return Switch *2 Mode Restoring Switch (for Business)
      *3 Mode Restoring Switch (for Entertainment) *4 Mode Restoring Switch (for Relaxation)
      *5 Memory Restoring Switch (w/ Ottoman) *6 Memory Restoring Switch (w/o Ottoman)
      *7 Hand-operated Adjustment Selector Switch (w/ Ottoman) *8 Hand-operated Adjustment Selector Switch (w/o Ottoman)
      *9 Headrest Switch *10 Shoulder Support Switch
      *11 Lumbar Support/Back Low Switch *12 Reclining Switch
      *13 Front Vertical Switch *14 Ottoman Switch
      *a Slide Function *b Reclining Function (Independent Operation)
      *c Reclining Function (Slide Interlocking Movement) *d Front Vertical Function
      *e Ottoman Develop Function *f Ottoman Expansion and Contraction Function
      *g Headrest Adjustment Function (Front/Rear) *h Headrest Adjustment Function (Up/Down)
      *i Lumbar Support Adjustment Function *j Back Low Adjustment Function
      *k Shoulder Support Function - -
      B004SZX Motor Drive Component B004UK4 Pneumatic Support Drive Component
      *l Illustration with a masterpiece - -

  2. CHECK SEAT POSITION MEMORY AND RESTORING FUNCTION


    1. Check seat position memory and restoring function:


      1. Turn the power switch on (IG) and check that the P position indicator is on.

      2. Move the seat to the foremost and uppermost positions using the rear power seat switch (rear multi operation panel).

      3. Check that the buzzer sounds for 0.5 seconds and the seat position is memorized when the M1 switch is pressed within 3 seconds of the SET switch being pressed or the M1 switch is pressed while the SET switch is being pressed.

      4. Move the seat out of the foremost and uppermost positions using the rear power seat switch (rear multi operation panel).

      5. Check that the buzzer sounds for 0.5 seconds and the seat position is memorized when the M2 switch is pressed within 3 seconds of the SET switch being pressed or the M2 switch is pressed while the SET switch is being pressed.

      6. Check that the buzzer sounds for 0.1 seconds and the seat automatically moves into the foremost and uppermost positions (memorized positions) when the M1 switch is pressed.

      7. Check that the buzzer sounds for 0.1 seconds and the seat automatically moves out of the foremost and uppermost positions (memorized positions) when the M2 switch is pressed.

      8. Turn the power switch off and open the rear door. Check that the buzzer sounds for 0.1 seconds and the seat automatically moves to the memorized position by pressing the M1 or M2 switch within 180 seconds after the power switch is turned off.

      9. Turn the power switch off and close the rear door. Check that the buzzer sounds for 0.1 seconds and the seat automatically moves to the memorized position by pressing the M1 or M2 switch within 60 seconds after the power switch is turned off.

  3. CHECK DOOR OPEN/CLOSE-LINKED RETURN OPERATION


    1. Turn the power switch on (IG) and change the shift position to P.

    2. When either the left or right rear seat door is opened, check that the slide and lumbar support for the corresponding door is operated to the rearmost position.