PRE-COLLISION SYSTEM(for Mono Camera Type), Diagnostic DTC:C1AA9

DTC Code DTC Name
C1AA9 Front Camera Module Beam Axis Not Adjusted

DESCRIPTION

If Forward Recognition Camera Learning has not been performed or did not complete normally after the forward recognition camera was replaced with a new one, DTC C1AA9 will be stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AA9 Front Camera Module Beam Axis Not Adjusted When the pre-collision system is on, the driving support ECU assembly detects that Forward Recognition Camera Learning has not been completed for 0.3 seconds or more. Front camera system

PROCEDURE


  1. GO TO FRONT CAMERA SYSTEM


    1. Perform troubleshooting for the front camera system.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    END