PRE-COLLISION SYSTEM(for Mono Camera Type) DTC CHECK / CLEAR

CHECK DTC

1. Connect the GTS to the DLC3.

2. Turn the power switch on (IG).

3. Turn the GTS on.

4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.

5. Check for DTCs.

   Click here

   
   
   1. Body Electrical > Pre-Collision 2 > Trouble Codes
   2. 
      
   3. 
      

CLEAR DTC

1. Connect the GTS to the DLC3.

2. Turn the power switch on (IG).

3. Turn the GTS on.

4. Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs.

5. Clear the DTCs.

   
   
   1. Body Electrical > Pre-Collision 2 > Clear DTCs
   2. 
      
   3.