FRONT POWER SEAT CONTROL SYSTEM CUSTOMIZE PARAMETERS

CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM

1. Customizing with the GTS

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the power switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Customize Setting / Seat.

   5. Select the setting by referring to the table below.

      
      
      1. Seat

         Tester Display	Description	Default	Setting	ECU
         Driver Seat Slide Link Hdrest Length Ctrl	Function to the physique compensation headrest control when driver seat is slide	Avail	0:Avail,1:Not Avl	Position control ECU assembly
         P-Seat Auto Pattern	Passenger seat full front/return operation order pattern setting	Auto-A	00:Auto-A,01:Auto-B,10:Auto-C	No. 2 position control ECU assembly
         Auto Operation Interference Avoidance Function	Function to reverse operation when jam detection is detected during slide direction driver seat	ON	0:ON,1:OFF	Mani body ECU (multiplex network body ECU)
         Seat Move Distance	Setting for the seat slide amount during power easy access system operation when exiting the vehicle	Standard	00:OFF,01:Little,10:Standard	Mani body ECU (multiplex network body ECU)
         Seat Lift Up Distance Adjust	Setting for the seat lift up amount during power easy access system operation when exiting the vehicle	Standard	00:OFF,01:Little,10:Standard	Mani body ECU (multiplex network body ECU)
         D Seat Lumbar Operation Away Function	Setting for driver seat lumbar operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	Position control ECU assembly
         D Seat Lower Back Operation Away Function	Setting for driver seat lower back operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	Position control ECU assembly
         D Seat Lower Cushion Operation Away Function	Setting for driver seat lower cushion operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	Position control ECU assembly
         D Seat Shoulder Operation Away Function	Setting for driver seat soulder operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	Position control ECU assembly
         D Seat Side Back Support Operation Away Function	Setting for driver seat side back operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	Position control ECU assembly
         D Side Cushion Support Operation Away Function	Setting for driver seat side cushion operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	Position control ECU assembly
         P Seat R&A Return Operation Function	Setting for front passenger operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         P Seat Lumbar Operation Away Function	Setting for front passenger seat lumbar operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         P Seat Lower Back Operation Away Function	Setting for front passenger seat lower back operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         P Seat Lower Cushion Operation Away Function	Setting for front passenger seat lower cushion operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         P Seat Shoulder Operation Away Function	Setting for front passenger seat shoulder cushion operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         P Seat Side Back Support Operation Away Function	Setting for front passenger seat side back operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         P Side Cushion Support Operation Away Function	Setting for front passenger seat side cushion operation availability during power easy access system operation when exiting the vehicle	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         Rear Seat Interference Avoidance Function (D)	Setting for reverse operation function availability when a jam is detected while the driver seat is moving toward the rear	ON	0:ON,1:OFF	Position control ECU assembly
         Instr-Panel Interference Avoidance Function (D)	Setting for reverse operation function availability when a jam is detected while the driver seat is moving toward the rear	ON	0:ON,1:OFF	Position control ECU assembly
         D Seat Pressure Correction Function	Setting for availability of driver seat air pressure correction used by the pneumatic support function	ON	0:ON,1:OFF	Position control ECU assembly
         P Auto Operation Interference Avoidance Function	Setting for reverse operation function availability when a jam is detected while the front passenger seat is moving toward the rear	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         Rear Seat Interference Avoidance Function (P)	Setting for reverse operation function availability when a jam is detected while the front passenger seat is moving toward the rear	ON	0:ON,1:OFF	No. 2 position control ECU assembly
         P Seat Pressure Correction Function	Setting for availability of driver seat air pressure correction used by the pneumatic support function	ON	0:ON,1:OFF	No. 2 position control ECU assembly

      2. 
         
      3. 
         
         10. 
             
         11. 
             
         12. 
             
         13. 
             
         14. 
             
         15. 
             
         16. 
             
         17. 
             
         18. 
             
         19. 
             
         20. 
             
         21. 
             
         22. 
             
         23. 
             
         24. 
             
         25. 
             
         26. 
             
         27. 
             
         28. 
             
         29. 
             
         30. 
             
         31. 
             
         32. 
             
         33. 
             

   6. Enter the following menus: Customize Setting / Entry & Start / Access.

   7. Select the setting by referring to the table below.

      
      
      1. Entry & Start

         Tester Display	Description	Default	Setting	ECU
         Seat position/Tilt & Telesco memory recall setting	This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system".	D Door	0:D Door,1:Any Door	Main body ECU (Multiplex network body ECU)

      2. 
         
      3. 
         
         10.