CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
PROCEDURE
INSTALL INNER REAR VIEW MIRROR ASSEMBLY
w/ Pre-collision System:
|
Install in this Direction |
Slide the inner rear view mirror assembly as shown in the illustration to temporarily install the inner rear view mirror assembly.
|
"TORX" Screw |
|
Connector |
Using a T20 "TORX" socket wrench, install inner rear view mirror assembly with the screw.
Connect the connector.
w/o Pre-collision System:
|
Install in this Direction |
Slide the inner rear view mirror assembly as shown in the illustration to temporarily install the inner rear view mirror assembly.
Using a T20 "TORX" socket wrench, install inner rear view mirror assembly with the screw.
Connect the connector.
INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System, for Stereo Camera Type)
INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System, for Stereo Camera Type)
INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System, for Mono Camera Type)
INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System, for Mono Camera Type)
INSTALL FRONT ROOF TOP GARNISH (w/ Pre-collision System)
INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)
Attach the guide and temporarily install the inner rear view mirror stay holder cover.
Slide the inner rear view mirror stay holder cover and attach the claw to install the inner rear view mirror stay holder cover.