METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Lane Change Flashing Times Adjust Function to change the lane change flashing time 3 $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 Combination meter assembly
        Flasher Sound Volume Adjust Function to change the flasher sound volume Medium $02:Large,$00:Medium,$01:Small Combination meter assembly

        Display
        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Adjust Function to change the ODO display time after the power switch is turned off 30s $00:30s,$01:60s,$02:600s,$03:OFF Combination meter assembly
        ECO Drive Indicator Zone Display Function (Meter) Function to change the ECO drive indicator zone isplay ON $00:OFF,$01:ON Combination meter assembly