Click here

METER / GAUGE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Click here
Click here
DTC Code DTC Name
  HOW TO PROCEED WITH TROUBLESHOOTING
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the following procedure to troubleshoot the meter / gauge system.

  • *: Use the GTS.

Click here

PROCEDURE


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

  2. Click here

    CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

  3. Click here

    INSPECT AUXILIARY BATTERY VOLTAGE


    1. Measure the auxiliary battery voltage.

      Standard voltage
      11 to 14 V (Power switch off)

      If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

      Result
      Proceed to
      NEXT

  4. Click here

    CHECK CAN COMMUNICATION SYSTEM*


    1. Check if CAN communication DTCs are output.

      Click here

      Result
      Result Proceed to
      CAN communication DTCs are not output. A
      CAN communication DTCs are output. B

  5. Click here

    CHECK FOR DTC*


    1. Check for DTCs.

      Click here


      1. Body Electrical > Combination Meter > Trouble Codes


      Result
      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

  6. Click here

    PROBLEM SYMPTOM CONFIRMATION

    Result
    Proceed to
    NEXT

  7. Click here

    SYMPTOM SIMULATION

    Result
    Proceed to
    NEXT

  8. Click here

    PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table.

      Click here

      Result
      Result Proceed to
      Fault is not listed in Problem Symptoms Table. A
      Fault is listed in Problem Symptoms Table. B

  9. Click here

    CIRCUIT INSPECTION

    Result
    Proceed to
    NEXT

  10. Click here

    REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

  11. Click here

    CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    • NEXT

      END