HEADUP DISPLAY SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Warm up the engine.

    2. Turn the power switch off.

    3. Connect the GTS to the DLC3.

    4. Turn the power switch on (IG).

    5. Turn the GTS on.

    6. Enter the following menus: Body Electrical / Head Up Display / Data List.

    7. Read the Data List according to the display on the GTS.


      Body Electrical > Head Up Display > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Total Distance Traveled Current total driving distance 0 to 16777215 [km/h] Equivalent to the actual total driving distance -
      Total Distance Traveled - Unit - - - Cannot be used
      Main Switch Integration control and panel assembly (headup display switch) status OFF or ON

      OFF: Switch released

      ON: Switch pushed

      -
      +B Voltage Auxiliary battery voltage 0 to 25.5 [V] 11 to 14 V Power switch off
      Illumination Rate from Illuminance Sensor Light control sensor input value 0 to 65535 [lx] Value according to the brightness is output 0 is displayed when there is no light
      Vehicle Speed Meter Vehicle speed input value 0 to 255 [km/h] Almost the same as actual vehicle speed -
      Engine RPM Engine speed 0 to 12701 [r/min] Almost the same as actual tachometer -
      Vehicle Speed from Meter ECU Vehicle speed input value 0 to 255 [km/h] Almost the same as actual vehicle speed -
      Brightness Up Switch Brightness up switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      This item can be inspected by adjusting a setting in the HUD settings of the settings tab displayed on the multi-information display.
      Brightness Down Switch Brightness down switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      This item can be inspected by adjusting a setting in the HUD settings of the settings tab displayed on the multi-information display.
      Projection Position Up Switch Projection position up switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      This item can be inspected by adjusting a setting in the HUD settings of the settings tab displayed on the multi-information display.
      Projection Position Down Switch Projection position down switch OFF or ON

      OFF: Switch released

      ON: Switch pushed

      This item can be inspected by adjusting a setting in the HUD settings of the settings tab displayed on the multi-information display.
      Display Change Switch - - - Cannot be used
      Display Angle Display angle of headup display -12.7 to 12.7 [deg] Current display angle of headup display
      • Approximately -12.7 deg: vehicle rear

      • Approximately - 0 deg: center

      • Approximately 12.7 deg: vehicle front

      Ambient Temperature (Celsius) Ambient temperature (celsius) -40 to 87 [°C] Actual ambient temperature displayed -
      Ambient Temperature (Fahrenheit) Ambient temperature (fahrenheit) -40 to 215 [°F] Actual ambient temperature displayed -
      Illumination Rate from Light Control Sensor - 0 to 65535 [lx] - -
      LDA System Availability of lane departure alert system With or Without

      With: Vehicle equipped with lane departure alert system

      Without: Vehicle not equipped with lane departure alert system

      -
      PCS System Availability of pre-collision system With or Without

      With: Vehicle equipped with pre-collision system

      Without: Vehicle not equipped with pre-collision system

      -
      ICS System Availability of paking assiste brake system With or Without

      With: Vehicle equipped with paking assiste brake system

      Without: Vehicle not equipped with paking assiste brake system

      -
      Radar Cruise System Availability of dynamic radar cruise control system With or Without

      With: w/ Dynamic radar cruise control system

      Without: w/o Dynamic radar cruise control system

      -
      Intuitive P/A System Availability of LEXUS parking assist-sensor system With or Without

      With: Vehicle equipped with clearance sonar system

      Without: Vehicle not equipped with clearance sonar system

      -
      Road Sign Assist System Availability of road sign assist system With or Without

      With: Vehicle equipped with road sign assist system

      Without: Vehicle not equipped with road sign assist system

      -
      ITS System Availability of ITS System With or Without

      With: Vehicle equipped with ITS system

      Without: Vehicle not equipped with ITS system

      -
      HV System Indicator Hybrid system indicator value -101 to 511 [%] Current hybrid system indicator status displayed -
      Navigation System Availability of navigation system With or Without

      With: Vehicle equipped with navigation system

      Without: Vehicle not equipped with navigation system

      -
      Audio Information Display Function Headup display audio information display setting OFF or ON Current headup display audio information display setting displayed -
      Master Caution Display Function Headup display master caution display setting OFF or ON Current headup display master caution display setting displayed -
      Speed Limit Display Function Headup display speed limit display setting OFF or ON Current headup display speed limit display setting displayed -
      Turn by Turn Animation Function - - - Cannot be used
      Traffic Sign Recognition Animation Function - - - Cannot be used
      Memory Call Link Function Headup display memory call link setting OFF or ON Current headup display memory call link setting displayed Cannot be used
      Seat Switch Link Function Headup display power seat switch link setting OFF or ON Current headup display power seat switch link setting displayed Cannot be used
      ECO Drive Indicator Zone Display Function Headup display hybrid system indicator display setting OFF or ON Current headup display hybrid system indicator display setting displayed -
      Color Test Screen (Black) Active Test color test screen OFF or ON Current Active Test color test screen condition displayed Cannot be used
      Color Test Screen (White) Active Test color test screen OFF or ON Current Active Test color test screen condition displayed Cannot be used
      Color Test Screen (Red) Active Test color test screen OFF or ON Current Active Test color test screen condition displayed Cannot be used
      Color Test Screen (Green) Active Test color test screen OFF or ON Current Active Test color test screen condition displayed Cannot be used
      Color Test Screen (Blue) Active Test color test screen OFF or ON Current Active Test color test screen condition displayed Cannot be used
      Color Test Screen (Color Bars) Active Test color test screen OFF or ON Current Active Test color test screen condition displayed Cannot be used
      Color Test Screen (Adjustment) Active Test color test screen OFF or ON Current Active Test color test screen condition displayed Cannot be used
      Display Brightness Active Test display brightness screen 0 to 100 [%] Current Active Test display brightness screen condition displayed -
      Display Position Active Test display position screen Up (+3)/Up (+2)/Up (+1)/Center/Down (-1)/Down (-2)/Down (-3) Current Active Test display position screen condition displayed -
      Pedestrian Reminder System Availability of pedestrian reminder system With or Without

      With: Vehicle equipped with pedestrian reminder system

      Without: Vehicle not equipped with pedestrian reminder system

      -
      FCTA System Availability of FCTA system With or Without

      With: Vehicle equipped with FCTA system

      Without: Vehicle not equipped with FCTA system

      -
      LTC System Availability of LTC system With or Without

      With: Vehicle equipped with FCTA system

      Without: Vehicle not equipped with FCTA system

      -
      LCS System Availability of LCS system With or Without

      Without: Vehicle not equipped with LCS system

      Without: Vehicle not equipped with LCS system

      -
      LVN System Availability of LVN system With or Without

      Without: Vehicle not equipped with LVN system

      Without: Vehicle not equipped with LVN system

      -
      Deadman System Availability of deadman system With or Without

      Without: Vehicle not equipped with deadman system

      Without: Vehicle not equipped with deadman system

      -
  2. Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    ACTIVE TEST


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Head Up Display / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Head Up Display > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Color Test Screen (Black) Displays each color on headup display ON -
      Color Test Screen (White) Displays each color on headup display ON -
      Color Test Screen (Red) Displays each color on headup display ON -
      Color Test Screen (Green) Displays each color on headup display ON -
      Color Test Screen (Blue) Displays each color on headup display ON -
      Color Test Screen (Color Bars) Displays each color on headup display ON -
      Color Test Screen (Adjustment) Displays each color on headup display ON -
      Display Brightness Changes the brightness of headup display 0 to 100 [%] -
      Display Position Move the position of headup display Up (+3)/Up (+2)/Up (+1)/Center/Down (-1)/Down (-2)/Down (-3) -