FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Connect the connector.

    2. Remove the tape to prevent wire harness from falling wire harness.

    3. Using a T30 "TORX" socket wrench, install the front door courtesy light switch with a new "TORX" screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }
      B004S62C01
      B004VGX Tape to prevent wire harness from falling B004RMI Install in this Direction
      B004SZX Connector B004UK4 "TORX" Screw