AMBIENT LIGHT(for Rear Door) INSPECTION

PROCEDURE

1. Click here

   INSPECT REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (Rear Door Trim Board Sub-assembly LH)

      Inspect the illumination.

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition K26-1(+) - Auxiliary battery positive (+) K26-2(-) - Auxiliary battery negative (-) Illuminates

      If the result is not as specified, replace the rear door trim board sub-assembly LH.

   2. 

      *a	Component without harness connected (Rear Door Trim Board Sub-assembly LH)

      Inspect the illumination.

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition J7-1(+) - Auxiliary battery positive (+) J7-2(-) - Auxiliary battery negative (-) Illuminates

      If the result is not as specified, replace the rear door trim board sub-assembly LH.

2. Click here

   INSPECT REAR DOOR TRIM BOARD SUB-ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (Rear Door Trim Board Sub-assembly RH)

      Inspect the illumination.

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition K12-1(+) - Auxiliary battery positive (+) K12-2(-) - Auxiliary battery negative (-) Illuminates

      If the result is not as specified, replace the rear door trim board sub-assembly RH.

   2. 

      *a	Component without harness connected (Rear Door Trim Board Sub-assembly RH)

      Inspect the illumination.

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition J3-1(+) - Auxiliary battery positive (+) J3-2(-) - Auxiliary battery negative (-) Illuminates

      If the result is not as specified, replace the rear door trim board sub-assembly RH.