INSIDE HANDLE LIGHT(for Rear Door) INSPECTION

PROCEDURE


  1. INSPECT REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. B004Y7OC32
      *a

      Component without harness connected

      (Rear Door Trim Board Sub-assembly LH(Inside Handle Light LH))

      Inspect the inside handle light.

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition

      K27-1 (+) - Auxiliary battery positive (+)

      K27-2 (-) - Auxiliary battery negative (-)

      		 Inside handle light LH illuminates

      If the result is not as specified, replace the rear door trim board sub-assembly LH.

  2. INSPECT REAR DOOR TRIM BOARD SUB-ASSEMBLY RH


    1. B004Y7OC31
      *a

      Component without harness connected

      (Rear Door Trim Board Sub-assembly RH(Inside Handle Light RH))

      Inspect the inside handle light.

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition

      K13-1 (+) - Auxiliary battery positive (+)

      K13-2 (-) - Auxiliary battery negative (-)

      		 Inside handle light RH illuminates

      If the result is not as specified, replace the rear door trim board sub-assembly RH.