VANITY LIGHT(for Rear Side) INSPECTION

PROCEDURE


  1. INSPECT VANITY MIRROR ASSEMBLY (for LH Side)


    1. B004VHMC02
      *a

      Component without harness connected

      (Vanity Mirror Assembly)

      Inspect the vanity mirror assembly.

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Inspection Condition Specified Condition

      N27-1 (B) - Auxiliary battery positive (+)

      N27-4 (E) - Auxiliary battery negative (-)

      		 Vanity mirror open Illuminates

      If the result is not as specified, replace the vanity mirror assembly.

  2. INSPECT VANITY MIRROR ASSEMBLY (for RH Side)


    1. B004VHMC01
      *a

      Component without harness connected

      (Vanity Mirror Assembly)

      Inspect the vanity mirror assembly.

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Inspection Condition Specified Condition

      N26-1 (B) - Auxiliary battery positive (+)

      N26-4 (E) - Auxiliary battery negative (-)

      		 Vanity mirror open Illuminates

      If the result is not as specified, replace the vanity mirror assembly.