VANITY LIGHT(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE VANITY MIRROR ASSEMBLY


    1. B004T3Y

      Insert moulding remover D at the location shown in the illustration and pull the vanity mirror assembly slightly forward.

      Note

      Do not pull moulding remover D too much as the claws of the vanity mirror assembly are attached.

    2. Detach the claw.

    3. B004STCC01
      B004RMI Remove in this Direction

      Pull in the direction indicated by the arrow shown in the illustration to detach the guide and remove the vanity mirror assembly.

    4. B004VGZ

      Disconnect the connector.