Click here

ELECTRICAL KEY OSCILLATOR(for Front Floor) REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure as for the RHD and LHD vehicles.

  • The procedure listed below is for the LHD vehicles.

Click here

PROCEDURE


  1. Click here

    REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  2. Click here

    REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Disconnect the connector.

    2. B004S4J

      Detach the clamp and remove the No. 1 indoor electrical key antenna assembly.

      Note:

      Do not reuse parts if dropped or subjected to any strong impact.