THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      ACC SW Power switch ON or OFF

      ON: Power switch on (ACC)

      OFF: Power switch off

      		 "ON" is also displayed for this item when the power switch is on (IG).
      IG SW Power switch ON or OFF

      ON: Power switch on (IG)

      OFF: Power switch off

      		 "OFF" is also displayed for this item when the power switch is on (ACC).
      RR Door Courtesy SW Rear door courtesy light switch RH ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Trunk Lock Position Luggage compartment door unlock detection switch signal Lock or Unlock

      Lock: Luggage compartment door locked

      Unlock: Luggage compartment door unlocked

      		 -
      FR Door Lock Pos Front door RH unlock detection switch LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door Courtesy light switch RH ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door LH unlock detection switch LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door Courtesy light switch LH ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      Hood Courtesy SW Engine hood courtesy switch ON or OFF

      ON: Engine hood open

      OFF: Engine hood closed

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch signal ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch signal ON or OFF

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      Intrusion Sens OFF SW Intrusion sensor cancel switch*5 ON or OFF

      ON: Intrusion sensor cancel switch on

      OFF: Intrusion sensor cancel switch off

      		 -
      Glass Break Sensor Detection Glass breakage sensor detection*6 ON or OFF

      ON: Glass breakage sensor detected

      OFF: Glass breakage sensor not detected

      		 Not applicable
      Intrusion Sensor Status of the intrusion sensor (theft warning ultrasonic sensor) detection*5 ON or OFF

      ON: Intrusion sensor (theft warning ultrasonic sensor) detected

      OFF: Intrusion sensor (theft warning ultrasonic sensor) not detected

      		 -
      Tilt Sensor Status of the yawrate sensor (theft warning tilt sensor) detection*7 ON or OFF

      ON: Yawrate sensor (theft warning tilt sensor) detected

      OFF: Yawrate sensor (theft warning tilt sensor) not detected

      		 -
      Intrusion Sen Conn Intrusion sensor (theft warning ultrasonic sensor) connecting*5 ON or OFF

      ON: Intrusion sensor (theft warning ultrasonic sensor) connected

      OFF: Intrusion sensor (theft warning ultrasonic sensor) not connected

      		 -
      Tilt Sensor Connect Yawrate sensor (theft warning tilt sensor) connecting*7 ON or OFF

      ON: Yawrate sensor (theft warning tilt sensor) connected

      OFF: Yawrate sensor (theft warning tilt sensor) not connected

      		 -
      Intrusion Sensor Sound Detect Sound detection status of the intrusion sensor (theft warning ultrasonic sensor)*1,*5 ON or OFF

      ON: Sound detected

      OFF: Sound not detected

      		 Not applicable
      Panic Function This function operates the theft deterrent system when the panic switch is pressed and held for 0.8 seconds*2 ON or OFF Customization status displayed -
      Window Open Warning This function is used to enable or disable the window open warning ON or OFF Customization status displayed -
      Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning ON or OFF Customization status displayed -
      Warning by Horn This function is used to enable or disable the warning by horn.*3 ON or OFF Customization status displayed -
      Intrusion Win Opened This function is used to enable or disable the window open warning*5 ON or OFF Customization status displayed -
      Security control with mechanism key This function makes it possible to cancel the security alarm with the mechanical key*4 ON or OFF Customization status displayed -
      Intrusion Sensor Sound Detection Function Setting of the customized item "Intrusion Sensor Sound Detection Function"*1,*5 ON or OFF Customization status displayed Not applicable
      Intrusion Sensor Sensitivity Level Setting of the customized item "Intrusion Sensor Sensitivity Level"*1,*5 Low or Normal Customization status displayed Not applicable

      • *1: w/o Door Ajar Warning Buzzer Function.

      • *2: w/ Panic Switch

      • *3: for vehicles displaying the item "Warning by Horn" on the GTS

      • *4: for vehicles displaying the item "Security control with mechanism key" on the GTS

      • *5: w/ Intrusion Sensor Cancel Switch

      • *6: Although the item is displayed on the GTS, it is not applicable to this vehicle.

      • *7: w/ Tilt Sensor

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.

    5. According to the display on the GTS, perform the Active Test.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Security Horn2 Theft warning siren assembly*1 ON or OFF -
      Vehicle Horn Vehicle horn ON or OFF -
      Security Horn Security horn*2 ON or OFF -
      Power For Intrusion Sensor Intrusion sensor (theft warning ultrasonic sensor) power supply*3 ON or OFF -
      Power For Tilt Sensor Yawrate sensor (theft warning tilt sensor) power supply*4 ON or OFF -

      • *1: w/o Security Horn Assembly

      • *2: w/ Security Horn Assembly

      • *3: w/ Intrusion Sensor Cancel Switch

      • *4: w/ Tilt Sensor


      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Immobiliser Indicator Security indicator ON or OFF -