PARKING SUPPORT BRAKE SYSTEM CUSTOMIZE PARAMETERS

CUSTOMIZE PARKING SUPPORT BRAKE SYSTEM

1. Customizing with the GTS.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the power switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Utility / Customize Setting.

   5. Select the setting by referring to the table below.

      
      Warning

      Tester Display	Description	Default	Setting	ECU
      Fr Corner Sensor Onset Range	Sets the detection operation range for the front corner sensors.	Long	0:Short,1:Long	Clearance warning ECU assembly
      Rr Corner Sensor Onset Range	Sets the detection operation range for the rear corner sensors.	Long	0:Short,1:Long	Clearance warning ECU assembly
      Fr Sensor Onset Range	Sets the detection operation range for the front center sensors.	Wide	0:Narrow,1:Wide	Clearance warning ECU assembly
      Rr Sensor Onset Range	Sets the detection operation range for the rear center sensors.	Wide	0:Narrow,1:Wide	Clearance warning ECU assembly
      Keep Sense Buzzer	Sets whether the buzzer stops sounding when the distance between the vehicle and a detected object does not change for 3 seconds.	Avail	0:Not Avail,1:Avail	Clearance warning ECU assembly
      Fr & Rr Buzzer Volume	Changes the buzzer volume setting.	M	01:L,10:M,11:H	Clearance warning ECU assembly
      Object Not Moving 3s Buzz Vol	Sets the volume at which the buzzer sounds when the distance between the vehicle and a detected object does not change for 3 seconds.	Keep	00:Keep Vol,01:L,10:M1,11:M2	Clearance warning ECU assembly
      Leave Buzzer Volume	Sets the volume of the buzzer with respect to the distance between the vehicle and a detected object.	L	00:Keep Vol,01:L,10:M1,11:M2	Clearance warning ECU assembly
      Temporary Mute Reset Speed Adjust	Sets the vehicle speed at which the temporary mute function resets.	20 km/h	00:System Link,01:15km/h,10:20km/h,11:30km/h	Clearance warning ECU assembly
      Temporary Mute Function	Sets the availability of the temporary mute function.	ON	0:OFF,1:ON	Clearance warning ECU assembly
      Clearance Sonar Auto Mute Function	Auto mute function.	ON	0:ON,1:OFF	Clearance warning ECU assembly
      Clearance Sonar Judgement of Obstacle on Course	Judgement of obstacle on course.	Valid	0:Valid,1:Invalid	Clearance warning ECU assembly

      
      Sensor

      Tester Display	Description	Default	Setting	ECU
      Sensor Condition N	Makes the front sensors available when shift lever is in N.	Avail	0:Not Avail,1:Avail	Clearance warning ECU assembly

      
      Display

      Tester Display	Description	Default	Setting	ECU
      Approach Display OFF	Sets whether the display turns off after an obstacle is no longer detected.	Avail	0:Not Avail,1:Avail	Clearance warning ECU assembly
      Display Mode	The display mode setting (when the LEXUS parking assist-sensor system is normal).	All	01:All,11:Undisp	Clearance warning ECU assembly

      
      Others

      Tester Display	Description	Default	Setting	ECU
      ICS Function	Parking support brake (static objects) function	ON	0:ON,1:OFF	Clearance warning ECU assembly
      ICS SW Status Memory	Parking support brake (static objects) function main switch memory function	Yes	0:Yes,1:No	Clearance warning ECU assembly
      ICS Stop Distance	Parking support brake (static objects) function target stopping distance	Long	0:Short,1:Long	Clearance warning ECU assembly
      RCTAB Function	Setting of the rear crossing traffic auto brake function	ON	0:ON,1:OFF	Clearance warning ECU assembly
      RCTAB Operation Timing Setting	Setting of the activation timing of the rear crossing traffic auto brake function	Standard	0:Late,1:Standard	Clearance warning ECU assembly
      RCTAB Sensitivity	Setting of the sensitivity of the rear crossing traffic auto brake function	Standard	0:Standard,1:Low	Clearance warning ECU assembly
      Pedestrian ICS Function	Setting of the pedestrians behind vehicle function	ON	0:ON,1:OFF	Clearance warning ECU assembly
      Pedestrian ICS Target Stopping Distance	Parking support brake (pedestrians behind vehicle) target stopping distance	Normal	0:Close,1:Normal	Clearance warning ECU assembly
      Pedestrian ICS Width Adjustment (Y Axis)	Setting of the sensitivity of the parking support brake (pedestrians behind vehicle) function	Narrow	0:Narrow,1:Normal	Clearance warning ECU assembly