TELEMATICS SYSTEM(for G-BOOK) TERMINALS OF ECU


  1. TELEMATICS TRANSCEIVER

    B004R8TC02
    *a Connect to roof antenna connector - -
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    G56-1 (+B) - G56-4 (E) LA-L - LA Power source (+B) Power switch off 11 to 14 V
    G56-2 (SPI+) - G56-4 (E) LA-L - LA Sound signal Audio system playing A waveform synchronized with sound is output
    G56-3 (SPI-) - G56-4 (E) LA-P - LA Sound signal Audio system playing A waveform synchronized with sound is output
    G56-4 (E) - Body ground LA - Body ground Ground Always Below 1 Ω
    G56-5 (SPO+) - G56-4 (E) LA-L - LA Sound signal Emergency call mode A waveform synchronized with the received voice is output
    G56-6 (SPO-) - G56-4 (E) LA-P - LA Sound signal Emergency call mode A waveform synchronized with the received voice is output
    G56-7 (IG2) - G56-4 (E) R - LA Power source (IG) Power switch on (IG) 11 to 14 V
    Power switch off Below 1 V
    G56-8 (ACC) - G56-4 (E) BE - LA Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V
    G56-9 (SLED) - G56-4 (E) SB - LA Emergency call switch illumination power supply Power switch on (ACC) 5 to 8 V
    Power switch off Below 1 V
    G56-11 (IND1) - G56-4 (E) G - LA Emergency call switch red indicator illumination signal For 5 seconds after turning the power switch on (ACC) 1 to 8.5 V
    Power switch off Below 1 V
    G56-12 (IND2) - G56-4 (E) P - LA Emergency call switch green indicator illumination signal For 5 seconds after turning the power switch on (ACC) 1 to 8.5 V
    Power switch off Below 1 V
    G56-13 (BBI-) LA-L Mayday battery (Back-up Battery) power supply - -
    G56-15 (CANP) G CAN communication signal - -
    G56-16 (CANN) W CAN communication signal - -
    G56-17 (MUTE) - G56-4 (E) L - LA MUTE Signal Audio system playing 3.5 V or higher
    Emergency call mode Below 1 V
    G56-18 (MCO+) - G56-4 (E) W - LA Microphone voice signal

    Refer to "Microphone Check"

    Click here

    		-
    G56-19 (MCO-) - G56-4 (E) B - LA Microphone voice signal

    Refer to "Microphone Check"

    Click here

    		-
    G56-20 (CTR1) SB Mayday battery (Back-up Battery) control line - -
    G56-21 (CTR2) LG Mayday battery (Back-up Battery) control line - -
    G56-24 (GSW) - G56-4 (E) W - LA Airbag deployment signal Power switch on (IG)

    Pulse generation

    (Refer to waveform 1)
    G56-26 (SIG-) - G56-4 (E) V - LA Ground Always Below 1 Ω
    G56-27 (SIG1) - G56-26 (SIG-) Y - V Emergency call switch button condition signal Emergency call switch not pressed 1.3 to 1.9 V
    Emergency call switch pressed 0.5 to 0.8 V
    G56-30 (BBI+) LA-R Mayday battery (Back-up Battery) power supply - -
    G56-32 (SGND) - G56-4 (E) Shielded - LA Shield ground Always Below 1 Ω
    G56-33 (MCVD) - G56-4 (E) R - LA Telephone microphone assembly power supply Power switch on (ACC) 4 to 6 V
    Power switch off Below 1 V
    G56-34 (MCI+) - G56-4 (E) W - LA Microphone voice signal

    Refer to "Microphone Check"

    Click here

    		-
    G56-35 (MCI-) - G56-4 (E) R - LA Microphone voice signal

    Refer to "Microphone Check"

    Click here

    		-
    A-1 (USB-) # USB communication line - -
    A-2 (USB+) # USB communication line - -
    A-6 (USBS) - Body ground Shielded - Body ground Shield ground Always Below 1 Ω
    A-3 (USBG) - Body ground # - Body ground Shield ground Always Below 1 Ω
    A-4 (VOT+) - G56-4 (E) # - LA Sent voice signal Calling while using the operator service A waveform synchronized with the sent voice is output
    A-5 (USBV) - G56-4 (E) # - LA Signal for connection check of DCM and radio receiver assembly Power switch on (ACC) 3.0 to 5.25 V
    Power switch off Below 1 V
    A-7 (VOT-) - G56-4 (E) # - LA Sent voice signal Calling while using the operator service A waveform synchronized with the sent voice is output
    A-8 (VOR-) - G56-4 (E) # - LA Receive voice signal Receiving a call while using the operator service A waveform synchronized with the received voice is output
    A-9 (VOR+) - G56-4 (E) # - LA Receive voice signal Receiving a call while using the operator service A waveform synchronized with the received voice is output

    • #: There is no wire color information


    1. Reference (Oscilloscope waveform):


      1. B004U10E01

        Waveform 1

        Item Condition
        Tester Connection G56-24 (GSW) - G56-4 (E)
        Tool Setting 5.0 V/DIV., 20 ms./DIV.
        Vehicle Condition Power switch on (IG)

  2. RADIO RECEIVER ASSEMBLY

    Click here

  3. NAVIGATION ECU

    Click here