NAVIGATION ECU INSTALLATION

PROCEDURE


  1. PRECAUTION

    Note

    After replacing the navigation ECU, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display, update the software of the radio receiver assembly.

    Click here

    Tech Tips


    • Use the same procedure for RHD and LHD vehicles.

    • The procedure listed below is for LHD vehicles.

  2. INSTALL NAVIGATION ECU

  3. INSTALL NO. 4 RADIO BRACKET


    1. B004TAZ

      Install the No. 4 radio bracket with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  4. INSTALL NO. 3 RADIO BRACKET


    1. B004VSB

      Install the No. 3 radio bracket with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  5. INSTALL NAVIGATION ECU WITH BRACKET


    1. B004WKK

      Install the navigation ECU with bracket to the radio receiver assembly with bracket using the 2 screws.

  6. INSTALL NO. 1 NAVIGATION WIRE


    1. B004VF5

      Connect the 2 connectors and install the No. 1 navigation wire.

  7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here