Click here

NAVIGATION SYSTEM Cursor or Map Rotates when Vehicle Stopped

Click here
Click here
DTC Code DTC Name
  Cursor or Map Rotates when Vehicle Stopped
Click here

PROCEDURE


  1. Click here

    CHECK CONDITION


    1. B004YM8

      Check with the customer if the vehicle has been turned by a turntable.

      OK
      Vehicle has not been turned by a turntable.
      Tip:

      If the vehicle is turned on a turntable with the power switch on (IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the power switch off and back to on (IG) again with the vehicle completely stopped.

      Result
      Proceed to
      OK
      NG

    • OK

      PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLEClick here

    • NG

      TURN POWER SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED