NAVIGATION SYSTEM CUSTOMIZE PARAMETERS

CUSTOMIZING WITH MULTI-DISPLAY

1. Turn the power switch on (IG).

2. Using the multi-display, select "Setup", "General", and then feedback force and change the customize setting.

   Item	Default	Content	Setting	Relevant ECU
   Feedback Force	2	Setting for the level of vibration feedback reaction force of the remote touch on the touch screen*	Off, 1, 2 or 3	Radio receiver assembly
   			NO VIBRATION/LEVEL1/LEVEL2/LEVEL3

   Tip:

   *: The higher the set value, the stronger the touch screen vibration feedback reaction force becomes.

3. Using the multi-display, select "Setup", "General", and then cursor speed and change the customize setting.

   Item	Default	Content	Setting	Relevant ECU
   Cursor speed	Normal	Setting for the speed at which the pointer/cursor moves when the touch screen is touched with a finger	Slow, Normal, or Fast	Radio receiver assembly
   			SLOW/NORMAL/FAST

4. Using the multi-display, select "Setup", "General", and then multi-touch command and change the customize setting.

   Item	Default	Content	Setting	Relevant ECU
   Multi-touch command	On	Enable/disable 2-finger cursor operation function	ON, OFF	Radio receiver assembly
   			ON/OFF

5. Using the multi-display, select "Setup", "Navi", and then map flick and change the customize setting.

   Item	Default	Content	Setting	Relevant ECU
   Map Flick	Off	Flick operation setting for full screen map display mode	ON, OFF	Radio receiver assembly
   			ON/OFF

6. Using the multi-display, select "Setup", "Vehicle", "Vehicle Customization" and then Convenience Services and change the customize setting.

   Item	Default	Content	Setting	Relevant ECU
   Convenience Services	On	Headlight and power window operation suggestion function	On, On While Stopped or Off	Main body ECU (Multiplex network body ECU)
   			ON/ON WHILE STOPPED/OFF