INSTRUMENT PANEL SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD and LHD sides.

  • The procedure listed below is for the LHD side.

PROCEDURE


  1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for Center)

    Note

    Do not touch the cone part of the front No. 3 speaker assembly.


    1. Connect the connector.

    2. Tighten the 2 screws in the order shown in the illustration to install the front No. 3 speaker assembly.

      B004UJIC04
      *A for 12 Speakers *B for 24 Speakers

  2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Center)

    Click here

  3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for Side)

    Note

    Do not touch the cone part of the front No. 2 speaker assembly.


    1. for LH Side:


      1. Connect the connector.

      2. Tighten the 2 screws in the order shown in the illustration to install the front No. 2 speaker assembly.

        B004TW1C04
        *A for 12 Speakers *B for 24 Speakers

    2. for RH Side:


      1. Connect the connector.

      2. Tighten the 2 screws in the order shown in the illustration to install the front No. 2 speaker assembly.

        B004Y1HC04
        *A for 12 Speakers *B for 24 Speakers

  4. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Side)

    Click here

  5. INSTALL FRONT PILLAR GARNISH RH (for Side)

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here