Click here

RADIO RECEIVER INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart.

Click here

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here

PROCEDURE


  1. Click here

    INSTALL RADIO RECEIVER ASSEMBLY

  2. Click here

    INSTALL NO. 2 RADIO RECEIVER BRACKET


    1. B004TFG

      Install the No. 2 radio receiver bracket with the 2 screws.

      2.0 N*m 20 kgf*cm 18 in.*lbf
  3. Click here

    INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. B004VFE

      Install the No. 1 radio receiver bracket with the 2 screws.

      2.0 N*m 20 kgf*cm 18 in.*lbf
  4. Click here

    INSTALL NO. 1 NAVIGATION WIRE

    Click here

  5. Click here

    INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. B004TO3

      Install the radio receiver assembly with bracket and navigation ECU assembly with bracket with the 2 bolts.

      2.0 N*m 20 kgf*cm 18 in.*lbf
    2. B004XEGC02
      B004RMI Install in this Direction

      Attach the claw to install the parking hold switch.

    3. B004UMXC03
      *a Guide
      *b Clamp

      Connect the connector.

    4. Connect the clamp and the guide to install the switch wire.

    5. Connect each connector.

    6. B004WS2C01
      B004RMI Install in this Direction

      Attach the clip to temporarily install the radio receiver assembly with bracket as shown in the illustration.

    7. B004XMJ

      Install the radio receiver assembly with bracket with the 4 bolts.

  6. Click here

    INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  7. Click here

    INSTALL LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY

    Click here

  8. Click here

    INSTALL INSTRUMENT SIDE PANEL RH


    1. B004WLVC01
      B004RMI Install in this Direction

      Attach the clip and install the instrument side panel RH in the direction indicated by the arrow shown in the illustration.

  9. Click here

    INSTALL INSTRUMENT SIDE PANEL LH


    1. B004XNPC01
      B004RMI Install in this Direction

      Attach the clip and install the instrument side panel LH in the direction indicated by the arrow shown in the illustration.

  10. Click here

    INSTALL CONSOLE BOX ASSEMBLY

    Click here