AUDIO AND VISUAL SYSTEM Voice is not Recognized

PROCEDURE

1. Click here

   CHECK CONDITION

   
   

   1. While paying attention to the condition of the spoken voice command, perform a voice recognition operation.

      OK
      Voice command is recognized normally.

      Tip:
      

      • When the voice command is recognized, the content of the voice command is displayed in the voice recognition result display area to the right of the mic icon. (Example: When "Cancel" is spoken, "Cancel" is displayed in the voice recognition result display area.)*1

      • When the voice recognition prompt function is set to "On" and a voice command is recognized normally, the same voice command is repeated by the voice guidance function. (Example: When "Cancel" is spoken, "Cancel" is repeated by the voice guidance function.)*2

      • If an unnecessary word (such as "um" or "ah") is spoken before or after the recognition word, the system incorrectly recognizes the recognition word.

      • The system cannot recognize voice commands when multiple people are speaking simultaneously.

      • If the speaking speed is too fast or too slow, the recognition rate may decrease.

      • The system may have difficulty recognizing voice commands depending on the voice quality (such as a hoarse voice due to poor physical condition).

      • 
        

        • *1: w/ Voice Recognition Result Display Function

        • *2: w/o Voice Recognition Result Display Function

      Result
      Proceed to OK NG

   
   
   • OK

     END (VOICE RECOGNITION MAY BE DIFFICULT DUE TO SPEECH CONDITION)

   • NG

     PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLEClick here