AUDIO AND VISUAL SYSTEM PRECAUTION

Note:

After the power switch is turned off, the radio receiver assembly records various types of memory and settings. As a result, after turning the power switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) auxiliary battery terminal.

Note:

• When replacing the radio receiver assembly or navigation ECU, always replace it with a new one.

  If a radio receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:

• 
  

  • A communication malfunction DTC may be stored.

  • The radio receiver assembly or navigation ECU may not operate normally.

• After replacing the radio receiver assembly, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display, update the software of the navigation ECU.

• After replacing the navigation ECU, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display, update the software of the radio receiver assembly.