Click here

STEERING COLUMN ASSEMBLY REASSEMBLY

Click here
Click here Click here

CAUTION / NOTICE / HINT

Note:

  • Do not drop the steering lock actuator or upper bracket assembly, strike it with tools or subject it toimpacts.

  • If the steering lock actuator or upper bracket assembly is subjected to an impact, replace it with a newone.

Click here

PROCEDURE


  1. Click here

    INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    1. Engage the 2 claws and guide to install the multiplex tilt and telescopic ECU.

  2. Click here

    INSTALL STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY

    Note:

    If the steering lock actuator or upper bracket assembly is replaced, refer to Service Bulletin.


    1. B004V9M

      Temporarily install the steering lock actuator or upper bracket assembly with 2 new steering lock set bolts.

    2. Tighten the 2 steering lock set bolts until the bolt head breaks off.