Click here

STEERING COLUMN ASSEMBLY INSPECTION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSPECT TILT MOTOR


    1. B004ROYC65
      *a

      Component without harness connected

      (Tilt Motor)

      Apply 12 V battery voltage to the tilt motor connector. Then check the steering wheel tilt operation.

      OK
      Tester Connection Specified Condition

      • 12 V battery positive (+) lead → Terminal G32-2 (TIM-)

      • 12 V battery negative (-) lead → Terminal G32-1 (TIM+)

      		 The steering wheel tilts down.

      • 12 V battery positive (+) lead → Terminal G32-1 (TIM+)

      • 12 V battery negative (-) lead → Terminal G32-2 (TIM-)

      		 The steering wheel tilts up.
  2. *a Component without harness connected (Telescopic Motor)
    Click here

    INSPECT TELESCOPIC MOTOR


    1. Apply 12 V battery voltage to the telescopic motor connector. Then check the steering column telescopic operation.

      OK
      Tester Connection Specified Condition

      • 12 V battery positive (+) lead → Terminal G23-4 (TEM+)

      • 12 V battery negative (-) lead → Terminal G23-1 (TEM-)

      		 The steering column contracts.

      • 12 V battery positive (+) lead → Terminal G23-1 (TEM-)

      • 12 V battery negative (-) lead → Terminal G23-4 (TEM+)

      		 The steering column extends.