VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION


  1. PERFORM ACTUATOR ANGLE NEUTRAL POINT CALIBRATION AND INITIALIZATION


    1. Position the tires straight ahead.

      Note

      Drive the vehicle to confirm that the steering wheel is centered.

    2. Turn the power switch off.

    3. Connect the GTS to the DLC3.

    4. Turn the power switch on (IG).

    5. Enter the following menus: Chassis / VGRS / Utility / Steering Angle Adjust.


      Chassis > VGRS > Utility
      Tester Display
      Steering Angle Adjust

    6. According to the display on the GTS, perform actuator angle neutral point calibration and initialization.