Click here

POWER STEERING SYSTEM DTC CHECK / CLEAR

Click here
Click here
Click here

  1. CHECK DTCs


    1. Turn the power switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Chassis / EMPS / Trouble Codes.


      1. Chassis > EMPS > Trouble Codes


      Note:

      If a malfunction is found, repair it, and then check the DTCs again to make sure that no DTCs are output.

  2. CLEAR DTCs


    1. Turn the power switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Chassis / EMPS / Trouble Codes.


      1. Chassis > EMPS > Clear DTCs


    6. Select the clear button and clear the DTCs according to the display.

    7. Turn the power switch off.