ELECTRIC PARKING BRAKE ACTUATOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 ACTUATOR HARNESS CLAMP


    1. B004U7P

      Connect the No. 1 actuator harness clamp with the 2 clamps.

  2. INSTALL NO. 2 ACTUATOR HARNESS CLAMP


    1. B004UGR

      Connect the No. 2 actuator harness clamp with the clamp.

  3. INSTALL NO. 1 CABLE SUPPORT BRACKET


    1. B004VTP

      Install the No. 1 cable support bracket in the direction indicated by the arrow shown in the illustration.

  4. INSTALL NO. 2 CABLE SUPPORT BRACKET


    1. B004T42

      Install the No. 2 cable support bracket in the direction indicated by the arrow shown in the illustration.

  5. INSTALL CABLE SUPPORT BRACKET


    1. B004SSN

      Install the parking brake cable support bracket in the direction indicated by the arrow shown in the illustration.

  6. INSTALL PARKING BRAKE ACTUATOR ASSEMBLY WITH BRACKET


    1. B004TYR

      Install the parking brake actuator assembly with bracket with the 3 nuts.

      Torque:
      27 N*m  { 275 kgf*cm, 20 ft.*lbf }
    2. B004XI3

      connect the 2 clamps to the rear suspension member sub-assembly.

    3. Install the parking brake actuator assembly with bracket with the bolt and 6 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      B004RKB

  7. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here