| DTC Code | DTC Name |
|---|---|
| C13AA | EPB High Temperature |
DESCRIPTION
If the electric parking brake is used continuously, the parking brake with bracket actuator assembly overheat prevention temporarily stops the system.
This DTC is stored to protect the system and is not a malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| C13AA | EPB High Temperature | Detection Condition 1:
Detection Condition 2:
|
Overheat due to continuous use of system | Yes | An electric parking brake system malfunction is displayed on the multi-information display. |
| Vehicle Condition | |||
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | Electric parking brake operating | ○ | ○ |
| Malfunction Status | Lock and release operations are performed within less than 2 seconds | ○ | - |
| Lock and release operations are performed within less than 2 seconds and target current is not achieved during lock control | - | ○ | |
| Detection Time | The malfunction status repeats 10 times | The malfunction status repeats 5 times or more, but less than 10 times | |
| Trip Count | 1 trip | 1 trip | |
If the conditions match either of these patterns, a DTC will be output.
PROCEDURE
ELECTRIC PARKING BRAKE OVERHEAT
Wait for approximately 1 minute.
Wait approximately 1 minute and then clear the DTCs.
| Result | ||
|---|---|---|
|
END