Click here

BRAKE BOOSTER PUMP DISPOSAL

Click here
Click here

PROCEDURE


  1. Click here

    DISPOSE OF BRAKE BOOSTER PUMP ASSEMBLY


    1. Remove the accumulator from the brake booster pump assembly.

    2. Secure the accumulator in a vise.

    3. B004UTVN02

      Using a hacksaw, make a cut in the side of the accumulator within location (A) to release the high-pressure gas.

      Location Length
      A 9 mm (0.354 in.)
      B 45 mm (1.77 in.)
      CAUTION:
      B004X9D

      • Wear protective glasses.

      • Small pieces of metal may fly out when cutting into the accumulator. Put a cloth over the hacksaw when cutting the accumulator. Cut the accumulator slowly so that the gas will be released gradually.

      Tip:

      Nitrogen gas, which is colorless, odorless and harmless, will be discharged.