FRONT BRAKE(except 6-Pot Caliper) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL FRONT DISC LH

   
   
   1. 

      Check the identification mark to determine the installation side.

      Note:

      The front disc needs to be installed to the correct side of the vehicle. There is a "L", indicating the disc for the left wheel, or a "R", indicating the disc for the right wheel, engraved on the disc in the position shown in the illustration.

   2. When reusing the front disc LH:

      
      
      1. 

         *a

         Matchmark

         Align the matchmarks of the front disc LH and front axle hub sub-assembly, and install the front disc LH.

   3. When replacing the front disc LH:

      
      

      1. Inspect the front disc runout.

         Click here

      2. Select the installation position where the front disc has minimal runout, and install the front disc LH.

   4. Temporarily install the 5 hub nuts.

2. Click here

   INSTALL DISC BRAKE CYLINDER ASSEMBLY LH

   
   

   1. Install the disc brake cylinder assembly to the steering knuckle with the 2 bolts.

      135 N*m

      1377 kgf*cm

      100 ft.*lbf

3. Click here

   CONNECT FRONT FLEXIBLE HOSE

   
   

   1. Connect the front flexible hose to the disc brake cylinder assembly with a new union bolt and a new gasket.

      39.2 N*m

      400 kgf*cm

      29 ft.*lbf

      Note:

      Install the front flexible hose lock securely into the lock hole in the disc brake cylinder assembly.

4. Click here

   INSTALL FRONT DISC BRAKE ANTI-SQUEAL SHIM

   Click here

5. Click here

   INSTALL FRONT DISC BRAKE PAD

   Click here

6. Click here

   CONNECT BRAKE BOOSTER PUMP CONNECTOR

   Click here

7. Click here

   BLEED BRAKE LINE

   Click here

8. Click here

   INSTALL FRONT WHEEL

   Click here