TIRE PRESSURE WARNING RECEIVER(for Quarter Pillar) INSTALLATION

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. B004T43

      Connect the connector.

    2. Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.

    3. Install the tire pressure warning ECU and receiver with the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  3. INSTALL PACKAGE TRAY TRIM SIDE COVER LH

    Click here

  4. INSTALL PACKAGE TRAY TRIM GARNISH LH

    Click here

  5. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH

    Click here

  6. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  7. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  8. INSTALL REAR SEAT ASSEMBLY


    1. for Fixed Seat Type:

      Click here

    2. for Power Seat:

      Click here

  9. CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  11. REGISTER TRANSMITTER ID

    Click here

  12. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  13. PERFORM INITIALIZATION

    Click here