Click here

FRONT LOWER BALL JOINT(for AWD) INSTALLATION

Click here
Click here Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL FRONT LOWER BALL JOINT ASSEMBLY


    1. B004U7O

      Install the front lower ball joint assembly LH to the front lower suspension arm assembly LH with the nut.

      145 N*m 1479 kgf*cm 107 ft.*lbf

    2. Install a new clip.

      Note:

      Further tighten the nut up to 60° if the holes for the clip are not aligned.

  2. Click here

    CONNECT LOWER NO.2 SUSPENSION ARM ASSEMBLY LH

    Click here

  3. Click here

    INSTALL STEERING KNUCKLE LH

    Click here