FRONT PNEUMATIC CYLINDER(for 2WD) DISPOSAL

PROCEDURE


  1. DISPOSE OF FRONT PNEUMATIC CYLINDER WITH SHOCK ABSORBER ASSEMBLY

    CAUTION:


    • Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.

    • Always wear safety glasses.

    B004X9D

    Tech Tips

    The gas is colorless, odorless and non-poisonous.


    1. Fully extend the front pneumatic cylinder with shock absorber assembly.

    2. B004SW3N01

      Using a drill, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.