Click here

FRONT ACCELERATION SENSOR INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL ACCELERATION SENSOR ASSEMBLY


    1. for LH Side:


      1. B004YM9

        Connect the connector.

      2. Install the acceleration sensor with the nut.

        7.5 N*m 76 kgf*cm 66 in.*lbf
        Note:

        • Avoid any impact to the acceleration sensor.

        • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

      3. Return the floor carpet to its original position.

    2. for RH Side:


      1. B004YU5

        Connect the connector.

      2. Install the acceleration sensor with the nut.

        7.5 N*m 76 kgf*cm 66 in.*lbf
        Note:

        • Avoid any impact to the acceleration sensor.

        • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

      3. Return the floor carpet to its original position.

  2. Click here

    INSTALL COWL SIDE TRIM BOARD LH

    Click here

  3. Click here

    INSTALL COWL SIDE TRIM BOARD RH

    Click here

  4. Click here

    INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  5. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  6. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here