FRONT PNEUMATIC CYLINDER(for AWD) DISPOSAL

PROCEDURE

1. Click here

   DISPOSE OF FRONT PNEUMATIC CYLINDER WITH SHOCK ABSORBER ASSEMBLY

   CAUTION:
   

   
   

   • Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.

   • Always wear safety glasses.

   Tip:

   The gas is colorless, odorless and non-poisonous.

   
   

   1. Fully extend the front pneumatic cylinder with shock absorber assembly.

   2. 

      Using a drill, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.