CAUTION / NOTICE / HINT
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
| *a | Paint Mark |
| *b | Marking Position |
Align the paint mark on a new rear door opening trim weatherstrip LH with the marking position on the body and install the rear door opening trim weatherstrip LH.
Always align the paint mark when installing the part. If the paint mark position is out of place, water leaks may occur.
After installing, check that the corners are properly installed.
To easily install the weatherstrip, first install the area with the paint mark and then push toward the corners.
INSTALL ROOF HEADLINING ASSEMBLY