FRONT DOOR OPENING TRIM WEATHERSTRIP INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. B004YOBC01
      *a Paint Mark
      *b Paint Mark Position

      Align the paint mark on a new front door opening trim weatherstrip LH with the marking position on the body and install the front door opening trim weatherstrip LH.

      Note


      • Always align the paint mark when installing the part. If the paint mark position is out of place, water leaks may occur.

      • After installing, check that the corners are properly installed.

      Tech Tips

      To easily install the weatherstrip, first install the area with the paint mark and then push toward the corners.

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here