Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Perform Registration (VIN registration) after replacing the ECM.
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
| Symptom | Suspected Area | Link |
|---|---|---|
| Fuel lid opener does not operate | Trunk and fuel switch assembly (fuel lid opener switch) | |
| Fuel lid with motor lock assembly | ||
| Instrument panel junction block assembly (FUEL LID OPN relay) | ||
| Harness or connector | ||
| ECM | ||
| Messages are not displayed on the multi-information display in the combination meter assembly | Harness or connector | - |
| Combination meter assembly | ||
| ECM |