Click here

DOOR CLOSER SYSTEM DATA LIST / ACTIVE TEST

Click here
Click here
Click here

  1. DATA LIST

    Note:

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tip:

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Turn the power switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / (desired system) / Data List.

    6. Read the Data List according to the display on the GTS.


      1. Body Electrical > Main Body > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        RR Door Courtesy SW Rear door courtesy light switch RH signal OFF or ON

        OFF: Rear door RH closed

        ON: Rear door RH open

        		 -
        RL Door Courtesy SW Rear door courtesy light switch LH signal OFF or ON

        OFF: Rear door LH closed

        ON: Rear door LH open

        		 -
        FR Door Courtesy SW Front door courtesy light switch RH signal OFF or ON

        OFF: Front door RH closed

        ON: Front door RH open

        		 -
        FL Door Courtesy SW Front door courtesy light switch LH signal OFF or ON

        OFF: Front door LH closed

        ON: Front door LH open

        		 -






      1. Body Electrical > Front Left Door > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Pawl Switch Pawl switch signal ON or OFF

        ON: Pawl switch is ON

        OFF: Pawl switch is OFF

        		 -
        Closer Position Switch Former position switch signal ON or OFF

        ON: Former position switch ON

        OFF: Former position switch OFF

        		 -
        Outside Handle Switch Handle switch signal ON or OFF

        ON: Handle switch ON

        OFF: Handle switch OFF

        		 -





      1. Body Electrical > Front Right Door > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Pawl Switch Pawl switch signal ON or OFF

        ON: Pawl switch is ON

        OFF: Pawl switch is OFF

        		 -
        Closer Position Switch Former position switch signal ON or OFF

        ON: Former position switch ON

        OFF: Former position switch OFF

        		 -
        Outside Handle Switch Handle switch signal ON or OFF

        ON: Handle switch ON

        OFF: Handle switch OFF

        		 -





      1. Body Electrical > Rear Left Door > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Pawl Switch Pawl switch signal ON or OFF

        ON: Pawl switch is ON

        OFF: Pawl switch is OFF

        		 -
        Closer Position Switch Former position switch ON or OFF

        ON: Former position switch ON

        OFF: Former position switch OFF

        		 -
        Half/Full-latch Switch Half/full latch switch signal ON or OFF

        ON: Half/full latch switch ON

        OFF: Half/full latch switch OFF

        		 -
        Closer Stop Switch Temporarily stop switch signal ON or OFF

        ON: Temporarily stop switch signal ON

        OFF: Temporarily stop switch signal OFF

        		 -
        Outside Handle Switch Handle switch signal ON or OFF

        ON: Handle switch ON

        OFF: Handle switch OFF

        		 -







      1. Body Electrical > Rear Right Door > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Pawl Switch Pawl switch signal ON or OFF

        ON: Pawl switch is ON

        OFF: Pawl switch is OFF

        		 -
        Closer Position Switch Former position switch ON or OFF

        ON: Former position switch ON

        OFF: Former position switch OFF

        		 -
        Half/Full-latch Switch Half/full latch switch signal ON or OFF

        ON: Half/full latch switch ON

        OFF: Half/full latch switch OFF

        		 -
        Closer Stop Switch Temporarily stop switch signal ON or OFF

        ON: Temporarily stop switch signal ON

        OFF: Temporarily stop switch signal OFF

        		 -
        Outside Handle Switch Handle switch signal ON or OFF

        ON: Handle switch ON

        OFF: Handle switch OFF

        		 -