Click here

SLIDING ROOF SYSTEM Remote Control System does not Operate

Click here
Click here
DTC Code DTC Name
  Remote Control System does not Operate
Click here

DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or wireless transmitter. Then, the main body ECU (multiplex network body ECU) activates the power window motor and sends the remote control signals to the sliding roof drive gear sub-assembly (sliding roof ECU) via LIN communication. The sliding roof drive gear sub-assembly (sliding roof ECU) receives those signals and activates the sliding roof motor.

Click here

CAUTION / NOTICE / HINT

Note:

  • The sliding roof key-linked function and sliding roof wireless transmitter-linked function can be customized. Make sure that both functions are ON.

    Click here

  • If the sliding roof drive gear sub-assembly (sliding roof ECU) is replaced, the sliding roof drive gear sub-assembly (sliding roof ECU) must be initialized.

    Click here

  • The sliding roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

    Click here

  • If a sliding roof drive gear sub-assembly (sliding roof ECU) DTC is output, first perform troubleshooting for the sliding roof drive gear sub-assembly (sliding roof ECU) DTC.

    Click here

Click here

PROCEDURE


  1. Click here

    CHECK REMOTE CONTROL FUNCTION


    1. Check the wireless transmitter-linked function.

      Click here

      Result
      Result Proceed to
      The sliding roof does not operate by the wireless transmitter-linked function, but all the power windows operate. A
      Both the power windows and roof glass do not operate by the wireless transmitter-linked function. B

    • A

      REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLYClick here

    • B

      GO TO POWER WINDOW CONTROL SYSTEMClick here