Click here

POWER WINDOW SWITCH(for Rear Door) REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. B004XC0

      Using moulding remover A, detach the claw and remove the rear power window regulator switch assembly with rear door armrest upper base panel from the rear door trim board sub-assembly LH.

      Note:

      Do not damage the armrest.

    2. Disconnect the connector.

    3. B004S3V

      Using moulding remover A, detach the claw and remove the rear power window regulator switch assembly from the rear door armrest upper base panel.