FRONT PASSENGER SIDE POWER WINDOW SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. B004WCK

      Using moulding remover A, detach the claw and remove the power window regulator switch assembly from the front door trim board sub-assembly RH.

      Note

      Do not damage the armrest.

    2. Disconnect the connector.

    3. B004SWP

      Using moulding remover A, detach the claw and remove the power window regulator switch assembly from the front door armrest upper base panel.