POWER WINDOW MASTER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. B004T1K

      Attach the claw and install the multiplex network master switch assembly to the front door armrest upper base panel.

    2. Connect the connector.

    3. B004TGPC01
      B004RMI Install in this Direction (1)
      B004T3S Install in this Direction (2)

      Insert the multiplex network master switch assembly with front door armrest upper panel into the front door trim board sub-assembly LH in the direction of the arrow (1) shown in the illustration.

    4. Attach the claw in the direction of the arrow (2) shown in the illustration and install the multiplex network master switch assembly with front door armrest upper panel to the front door trim board sub-assembly LH.

  2. INSPECT POWER WINDOW OPERATION

    Click here

  3. INSPECT DOOR LOCK OPERATION

    Click here

  4. INSPECT POWER MIRROR CONTROL SYSTEM

    Click here