Click here

ROOF HEADLINING INSTALLATION

Click here
Click here Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

Click here

PROCEDURE


  1. Click here

    INSTALL OUTSIDE REAR DOOR SCUFF PLATE LH


    1. B004UV1C01
      B004RMI Install in this Direction

      Attach the claw to install the outside rear door scuff plate LH in the direction indicated by the arrow shown in the illustration.

    2. Remove the protective tape.

  2. Click here

    INSTALL OUTSIDE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure described for the LH side.

  3. Click here

    INSTALL OUTSIDE FRONT DOOR SCUFF PLATE LH


    1. B004VARC01
      B004RMI Install in this Direction

      Attach the claw to install the outside rear door scuff plate LH in the direction indicated by the arrow shown in the illustration.

    2. Remove the protective tape.

  4. Click here

    INSTALL OUTSIDE FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure described for the LH side.

  5. Click here

    INSTALL ROOF HEADLINING ASSEMBLY


    1. B004RJS

      Install a new grommet to the vehicle.

      Tip:

      Use the same procedure for the opposite side.

    2. B004W9FC01
      *a Clip (White)
      *b Clip (Black)
      B004RMI Install in this Direction

      Install the 3 clips to the roof headlining assembly.

    3. B004YOFC01
      B004RMI Install in this Direction

      Tilt the roof headlining assembly and insert it from the front of the vehicle.

      Note:

      • Installation of the roof headlining assembly must be performed by multiple people to prevent deformation of the roof headlining assembly.

      • Check that the corners of the roof headlining assembly are free of bending, twisting and other deformation and that none of the mounted parts are falling off.

      • Do not damage the roof headlining assembly and body interior.

    4. B004YH4

      Attach the clip.

    5. Insert the guide.

    6. B004TLWC02
      *a Fastener *b Hook
      *c Guide - -
      B004RMI Install in this Direction - -

      Push the roof headlining assembly up in the direction indicated by the arrow shown in the illustration and attach the hook, fastener and claw.

    7. w/ Rear Cooler:


      1. B004USZ

        Install the screw.

        Tip:

        Use the same procedure for the opposite side.

    8. B004UWC

      Connect the connector.

    9. B004WA0

      Attach the claw to install the base of the visor holder LH as shown in the illustration.

      Tip:

      Use the same procedure for the opposite side.

    10. Front pillar LH side:


      1. Remove the protective cover installed to the front pillar LH.

      2. B004S2Q

        Attach the clamp and connect the 3 connectors.

      3. Install the protective cover to the front pillar LH.

    11. Rear pillar RH side:


      1. B004W8F

        Connect the 3 connectors.

  6. Click here

    INSTALL WINDSHIELD GLASS

    Click here

  7. Click here

    INSTALL MAP LIGHT ASSEMBLY

    Click here

  8. Click here

    INSTALL FRONT ROOF TOP GARNISH


    1. B004TBBC01
      B004RMI Install in this Direction

      Insert the guide in the direction indicated by the arrow shown in the illustration.

    2. B004URPC01
      B004RMI Install in this Direction

      Push in the direction indicated by the arrow shown in the illustration to attach the claw.

    3. B004T2OC01
      B004RMI Install in this Direction

      Attach the claw in the direction indicated by the arrow shown in the illustration to attach the claw to install the front roof top garnish.

  9. Click here

    INSTALL VANITY LIGHT ASSEMBLY

    Click here

  10. Click here

    INSTALL VISOR HOLDER LH


    1. B004XMRC01
      B004RMI Install in this Direction

      Push in the end of the visor holder LH to install the visor holder LH.

  11. Click here

    INSTALL VISOR ASSEMBLY LH


    1. B004RFVC01
      B004RMI Install in this Direction

      Set the visor assembly LH into place by aligning it upward with the connector and screw fastening hole.

      Note:

      • When setting the part into place, move it straight upward so as not to damage the connector.

      • Hold the visor assembly with one hand so that it does not drop.

    2. Connect the visor assembly LH to the visor holder LH to set it into place.

    3. Install the visor assembly RH with the 2 screws.

  12. Click here

    INSTALL VISOR BRACKET COVER LH


    1. B004WZO

      Attach the claw to install the visor bracket cover LH.

  13. Click here

    INSTALL VISOR HOLDER RH

    Tip:

    Use the same procedure described for the LH side.

  14. Click here

    INSTALL VISOR ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  15. Click here

    INSTALL VISOR BRACKET COVER RH

    Tip:

    Use the same procedure described for the LH side.

  16. Click here

    INSTALL COAT HOOK (w/o Rear Cooler)


    1. B004XY0C01
      B004RMI Install in this Direction

      Attach the claw to install the coat hook.

    2. B004VIG

      Install the screw.

  17. Click here

    INSTALL VANITY MIRROR ASSEMBLY

    Click here

  18. Click here

    INSTALL SPOT LIGHT ASSEMBLY

    Click here

  19. Click here

    INSTALL ASSIST GRIP SUB-ASSEMBLY

    Tip:

    Use the same procedure for the other assist grips.


    1. B004SKC

      Install the 2 clips to the assist grip sub-assembly.

    2. Temporarily install the 2 assist grip covers to the assist grip sub-assembly as shown in the illustration.

    3. B004UTK

      Attach the clip to install the assist grip sub-assembly.

    4. B004SRIC01
      *1 Assist Grip Cover LH
      *2 Assist Grip Cover RH

      Attach the claw to install the assist grip cover LH and assist grip cover RH.

      Note:

      Check that the 2 clips are securely attached.

  20. Click here

    INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH


    1. B004XHBC01
      B004RMI Install in this Direction

      Insert the guide in the direction indicated by the arrow shown in the illustration.

    2. B004W5ZC01
      B004RMI Install in this Direction

      Push in the direction indicated by the arrow shown in the illustration to attach the clip to install the inner roof side garnish assembly LH.

  21. Click here

    INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  22. Click here

    INSTALL PACKAGE TRAY TRIM SIDE COVER LH


    1. B004TPRC01
      *1 Inner Roof Side Garnish Assembly LH
      B004RMI Install in this Direction

      Attach the clamp and clip in the direction indicated by the arrow shown in the illustration to install the package tray trim side cover LH.

      Note:

      When attaching clamp A, push down on the roof side inner garnish assembly LH side.

  23. Click here

    INSTALL PACKAGE TRAY TRIM SIDE COVER RH

    Tip:

    Use the same procedure described for the LH side.

  24. Click here

    INSTALL PACKAGE TRAY TRIM GARNISH LH


    1. B004XXTC01
      B004RMI Install in this Direction

      Insert the guide in the direction indicated by the arrow shown in the illustration.

    2. B004TRAC01
      B004RMI Install in this Direction

      Push in the direction indicated by the arrow shown in the illustration to install the package tray trim garnish LH.

    3. Remove the protective tape.

  25. Click here

    INSTALL PACKAGE TRAY TRIM GARNISH RH

    Tip:

    Use the same procedure described for the LH side.

  26. Click here

    INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH


    1. B004YLSC01
      B004RMI Install in this Direction

      Attach the clip in the direction indicated by the arrow shown in the illustration.

    2. B004U6PC01
      B004RMI Install in this Direction

      Attach the clip to install the roof side rail garnish assembly LH in the direction indicated by the arrow shown in the illustration.

  27. Click here

    INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  28. Click here

    INSTALL REAR SEAT SIDE GARNISH LH


    1. for Fixed Seat Type:


      1. B004VP6C01
        B004RMI Install in this Direction

        Attach the clip in the direction indicated by the arrow shown in the illustration.

      2. B004V6UC01
        B004RMI Install in this Direction

        Push in the direction indicated by the arrow shown in the illustration to attach the clamp and claw to install the rear seat side garnish LH.

      3. B004WX5C01
        B004RMI Install in this Direction (1)
        B004T3S Install in this Direction (2)

        Insert the guide in the installation direction (1) shown in the illustration.

      4. Attach the guide in the installation direction (2) shown in the illustration.

      5. Attach the clip to install the belt guide.

    2. for Power Seat:


      1. B004X0NC01
        B004RMI Install in this Direction

        Insert the guide and attach the clip and claw in the direction indicated by the arrow shown in the illustration.

      2. B004STZC01
        B004RMI Install in this Direction

        Push in the direction indicated by the arrow shown in the illustration to attach the clamp to install the rear seat side garnish LH.

  29. Click here

    INSTALL REAR SEAT SIDE GARNISH RH

    Tip:

    Use the same procedure described for the LH side.

  30. Click here

    INSTALL UPPER CENTER PILLAR GARNISH LH


    1. B004WE7C01
      B004RMI Install in this Direction

      Align the hook, attach the clip to install the upper center pillar garnish LH in the direction indicated by the arrow shown in the illustration.

    2. B004VOG

      Install the 2 clips.

  31. Click here

    INSTALL UPPER CENTER PILLAR GARNISH RH

    Tip:

    Use the same procedure described for the LH side.

  32. Click here

    INSTALL LOWER CENTER PILLAR GARNISH LH


    1. B004XA7C02
      *1 Rear Cooler Air Duct Adapter LH
      *2 No. 2 Floor Heater Air Duct LH
      B004RMI Install in this Direction (1)
      B004T3S Install in this Direction (2)

      Align the rear cooler air duct adapter LH of the lower center pillar garnish LH with the position of the No. 2 floor heater air duct RH in the installation direction (1) shown in the illustration.

    2. Insert the rear cooler air duct adapter LH in the installation direction (2) shown in the illustration.

    3. B004TV2C02
      B004RMI Install in this Direction

      Push in the direction indicated by the arrow shown in the illustration to attach the claw and clip to install the lower center pillar garnish RH.

  33. Click here

    INSTALL LOWER CENTER PILLAR GARNISH RH

    Tip:

    Use the same procedure described for the LH side.

  34. Click here

    INSTALL FRONT PILLAR GARNISH LH


    1. Peel off the adhesive tape and remove the protective cover.

    2. B004TKQ

      Install the 2 front pillar garnish clips to the front pillar garnish LH.

      Note:

      • If there is extreme damage to the front pillar garnish clip, replace it with a new one.

      • Make sure that the position and direction of the front pillar garnish clip is correct when installing.

    3. B004YLCC01
      B004RMI Install in this Direction

      Insert the guide in the direction indicated by the arrow shown in the illustration.

    4. B004R2WC01
      B004RMI Install in this Direction

      Push in the direction indicated by the arrow shown in the illustration to attach the clip to install the front pillar garnish LH.

  35. Click here

    INSTALL FRONT PILLAR GARNISH RH

    Tip:

    Use the same procedure described for the LH side.

  36. Click here

    INSTALL REAR DOOR SCUFF PLATE LH


    1. B004R1MC01
      B004RMI Install in this Direction

      Attach the claw and align the guide in the direction indicated by the arrow shown in the illustration.

    2. B004W1CC01
      B004V32 Place hand here
      B004RMI Install in this Direction (1)
      B004T3S Install in this Direction (2)

      Push in the installation direction (1) shown in the illustration to attach the claw on the vehicle exterior side and align the guide.

    3. Place your hand at the position shown in the illustration and attach the claw while pulling in the installation direction (2) to install the rear door scuff plate LH.

  37. Click here

    INSTALL REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure described for the LH side.

  38. Click here

    INSTALL FRONT DOOR SCUFF PLATE LH


    1. B004VLQC02
      B004RMI Install in this Direction

      Attach the claw and align the guide in the direction indicated by the arrow shown in the illustration.

    2. B004SGMC02
      B004V32 Place hand here
      B004RMI Install in this Direction (1)
      B004T3S Install in this Direction (2)

      Push in the installation direction (1) shown in the illustration to attach the claw on the vehicle exterior side and align the guide.

    3. Place your hand at the position shown in the illustration and attach the claw while pulling in the installation direction (2) to install the front door scuff plate LH.

  39. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure described for the LH side.

  40. Click here

    INSTALL REAR SEATBACK ASSEMBLY LH (for Power Seat)

    Click here

  41. Click here

    INSTALL REAR SEATBACK ASSEMBLY RH (for Power Seat)

    Tip:

    Use the same procedure described for the LH side.

  42. Click here

    INSTALL REAR SEAT CUSHION LOCK HOOK (for Power Seat)

    Click here

  43. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY LH (for Power Seat)

    Click here

  44. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY RH (for Power Seat)

    Tip:

    Use the same procedure described for the LH side.

  45. Click here

    INSTALL REAR SEATBACK HOLDER (for Fixed Seat Type)

    Click here

  46. Click here

    INSTALL REAR SEAT CUSHION LOCK HOOK (for Fixed Seat Type)

    Click here

  47. Click here

    INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

    Click here

  48. Click here

    INSTALL NO. 1 SEAT ARMREST CAP (for Fixed Seat Type)

    Click here

  49. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

    Click here

  50. Click here

    INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  51. Click here

    INSTALL FRONT SEAT ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  52. Click here

    CHECK SRS WARNING LIGHT

    Click here

  53. Click here

    PERFORM SYSTEM CALIBRATION (w/ Occupant Classification System)

    Click here