ROOM TEMPERATURE SENSOR(for Rear Side) INSPECTION

PROCEDURE

1. Click here

   INSPECT NO. 2 COOLER THERMISTOR

   
   
   1. 

      *a	Component without harness connected (Cooler thermistor (No. 2 room temperature))
      *b	Resistance (kΩ)
      *c	Temperature (°C (°F))
      *d	Allowable Range

      RH Side:

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition J2-1 - J2-2 10°C 3.00 to 3.73 kΩ 15°C 2.45 to 2.88 kΩ 20°C 1.95 to 2.30 kΩ 25°C 1.60 to 1.80 kΩ 30°C 1.28 to 1.47 kΩ 35°C 1.00 to 1.22 kΩ 40°C 0.80 to 1.00 kΩ 45°C 0.65 to 0.85 kΩ 50°C 0.50 to 0.70 kΩ 55°C 0.44 to 0.60 kΩ 60°C 0.36 to 0.50 kΩ

         Tip:
         

         • If the temperature sensor is touched, body heat will affect the sensor and a correct judgment cannot be made. Therefore, when inspecting the sensor, hold it by the connector.

         • When measuring, the sensor temperature must be the same as the ambient temperature.

   2. 

      *a	Component without harness connected (Cooler thermistor (No. 2 room temperature))
      *b	Resistance (kΩ)
      *c	Temperature (°C (°F))
      *d	Allowable Range

      LH Side:

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition J6-1 - J6-2 10°C 3.00 to 3.73 kΩ 15°C 2.45 to 2.88 kΩ 20°C 1.95 to 2.30 kΩ 25°C 1.60 to 1.80 kΩ 30°C 1.28 to 1.47 kΩ 35°C 1.00 to 1.22 kΩ 40°C 0.80 to 1.00 kΩ 45°C 0.65 to 0.85 kΩ 50°C 0.50 to 0.70 kΩ 55°C 0.44 to 0.60 kΩ 60°C 0.36 to 0.50 kΩ

         Tip:
         

         • If the temperature sensor is touched, body heat will affect the sensor and a correct judgment cannot be made. Therefore, when inspecting the sensor, hold it by the connector.

         • When measuring, the sensor temperature must be the same as the ambient temperature.